Businesses with a critical need for continuous electricity face an important choice when they need to select the right supplier of diesel generators. The diesel generator supplier in UAE you select can impact performance, maintenance, and life cycle operating costs for the generator, whether for a construction site, hospital, factory, commercial building, telecom facility, or industrial operation However, choosing a supplier should not be based on price alone.
Genyard Energy is one of the leading diesel generator manufacturers in UAE that provides generator solutions based on various power requirements and applications builds its units keeping these points.
1. Get the capacity and specifications right
Determine the proper size and features. Begin with the actual power requirement. Add up the connected load, consider motor and pump starting load and allow for future expansion. A good supplier will assist you to do this rather than just quoting a number. Ask in writing the following information for each diesel generator:
• kVA rating and standby power rating
• Voltage, frequency and phase configuration
• Fuel consumption at different loads
• Engine and alternator specifications
• Control panel features
• Cooling and ventilation requirements
Size matters both ways. If the generator is too small, it will be difficult to operate when the load is heavy. If one is too heavy is more expensive to purchase, fuel and maintain.
2. Ask for the dimensions and weight
Request all suppliers to provide the exact size and weight of the generator with and without canopy and fuel.
This is necessary to ensure that the unit will fit in your plant room or on site. It also provides information on the type of crane or trolley required, if the load will fit on top of the floor/slab or down underneath, and whether the crane/trolley will be able to pass through the access route.
3. Check the thickness of the canopy sheets
In the UAE, a canopy has a hard life. It faces strong sun, dust, humidity and sometimes sand storms. Thin sheet metal is more susceptible to denting, vibration and rusting. Inquire about the thickness of the sheet the supplier uses for the canopy and include that in your quotation. It’s possible for two supplies to be the same kVA, both be the same engine and one canopy be obviously weaker than the other. Thicker sheets will withstand wear and tear and can also help reduce noise.
4. Look at the lifting points
The lifting point should be designed for the entire generator set, and not just for the canopy. Lifting eyes that are attached only to the canopy are not designed to lift the engine, alternator and base frame. Don’t lift the full set from them; it will cause damage to the canopy, or an accident may occur.
Ask the supplier whether the lifting points are rated to lift the entire weight of the generator, and show where they are. This is important for loading, unloading and positioning on site in a safe manner.
5. Confirm powder coating on the base frame and the canopy
Over the years, the generator proves its durability to the UAE weather by the paint finish. Check if the entire base frame is powder coated, rather than just the canopy panels.
A powder coating is one of the most uniform and durable finishes than the regular spray paint. It has a superior scratch, heat and corrosion resistance. The base frame is close the ground and is the first thing to get wet, dirty and fuel spills on it, so it should never be the part that gets skipped.
6. Insist on genuine components
The engine and alternator are the heart of a diesel generator, so check the brand and model of both. Then look at the smaller parts too, such as the control panel, breaker, batteries, filters and cooling system.
Request a supplier to certify all parts are genuine. Copies and non-branded parts may be virtually identical. makes life simple later on as spares are readily available and the service team is familiar with the job they are doing.
Do not compare on kVA alone. Never compare based on kVA. Fuel consumption, build quality and longevity can vary significantly between two generators that are rated the same.
7. Check the full warranty coverage
Request the terms in writing and ensure that the terms are read correctly.
Find out:
• The warranty period and applicability of the warranty to the engine, alternator, control panel/console and canopy
• Whether parts and labour are both covered
• What could void the warranty
• How fast the supplier responds to a claim
Full warranty coverage is a sign that the supplier is confident in their own product. If it’s a short or limited warranty that has a lot of exclusions, then you should ask yourself why.
8. Compare after-sales support and customisation
Check installation and commissioning, maintenance, spare parts, technical support and emergency service, and if the supplier serves your area. A good service team cuts down unexpected downtime and adds years to the life of the generator. If there are special needs on your site, find out what the supplier can do.
9. Look at the total cost, not just the price
Not all of the lowest prices are necessarily the best. Consider fuel consumption, servicing, spare parts, installation and life expectancy over the years. Ensure that each quote includes the same content as well. A low price is usually indicative of a lower quality product, possibly a thinner canopy, a cheaper alternator or a shorter warranty.
10. Check experience in your industry
Finally, review the supplier’s past performance. A team that has experience in the hospitals, factories, telecom sites or construction projects will learn your needs quicker. Seek references, previous work and engineering assistance that will be provided.
Conclusion
Choosing a diesel generator supplier in UAE takes more than comparing the final figure on a quotation. Look at the size and weight, the canopy sheet thickness, the lifting points, the powder coating, the components and the warranty, along with capacity and service support. When you choose a diesel generator supplier in UAE on these points, you get a generator that keeps your business running when it matters most.
Genyard Energy is a UAE based manufacturer of diesel generators, that offers engineered generator solutions and technical support to a variety of commercial and industrial applications. Choosing a supplier with reliable supply, service, and overall value can help ensure consistent performance and reliability.
